Pressure filters

With the Pontec PondoPress 10000 pressure filter set you are assured of a beautifully clear and healthy pond. The filter set is equipped with a multiple filter system, UV-C technology and a strong filter pump with a 5 meter long hose. This allows you to keep a pond of up to 10,000 liters clear and healthy without fish stocking. If you have a pond with fish stock, you can keep a pond up to 5000 liters beautiful with this pressure filter set. with a koi pond you have to take into account a pond volume of up to 2500 liters. Multiple Pressure Filter Due to the strong power of this filter, it can even supply a higher watercourse up to 1 meter with water. You can easily place the filter out of sight because you can place it partly in the ground. The pressure filter works with both mechanical and biological filter media. The mechanical filter ensures that the organic dirt particles are removed from the water by means of foam mats. The pond water then flows past biological filter elements that contain micro-organisms. These organisms convert harmful substances into less harmful substances that are absorbed by, for example, pond plants. Ultimately, the UV-C lamp ensures that the floating algae are removed, so that you cannot get green water. Powerful filter pump The supplied filter pump can transport no less than 2500 liters of water per hour. You can connect the pressure filter and filter pump with the included 5 meter hose. The pump can transport coarse dirt particles up to 4 mm in size and other turbid or suspended substances.

With the help of the Pontec PondoPress 15000 pressure filter set you are able to keep your pond clear and healthy. The pressure filter set consists of a multiple filter system, UV-C technology and a strong filter pump with a 5 meter long hose. With this pressure filter set you are able to keep a pond of up to 15000 liters clear and healthy without fish stocking. With a pond with fish stock you can keep the pond healthy up to 7500 liters. Do you have a beautiful koi pond? Then you have to take into account a pond volume of up to 3750 liters. Bio and mechanical filter media Thanks to the strong power of the pressure filter, it can supply water up to 1 meter higher up a stream. Because you can place the filter partly in the ground, it is less visible. The pressure filter has biological and mechanical filter media. The filtering starts with foam mats that filter the organic dirt particles from the water. After this, the pond water flows past biological filter elements that are provided with micro-organisms. Here the harmful substances are converted into less harmful substances that are absorbed by, for example, pond plants. Finally, the UV-C lamp ensures that the floating algae are removed. With the advantage that you do not get green water. Powerful filter pump By means of the supplied filter pump, no less than 2500 liters of water can be transported per hour. The Pontec PondoPress 15000 pressure filter set also includes a 5 meter long pond hose, with which you can connect the pressure filter and the filter pump. With this, the pond can be freed from coarse dirt particles up to a size of 4 mm and from other turbid or suspended substances.

With this complete filter package from Oase you are assured of a clear and healthy pond. The Oase Biopress 4000 is suitable for ponds with a maximum capacity of 4000 litres. In the case of fish ponds, this maximum pond volume is halved. And are you the lucky owner of koi carp? Then you have to take into account a reduction to 1000 liters of pond volume. If you take this information into account, you are assured of a clear and healthy pond. You can even claim the Oasis 'Clear Water Guarantee'. Specifications Content Natural Pond: 0 - 4.000 Fish pond content: 0 - 2,000 Content Koi pond 0 - 1,000 Max. Capacity: 1,500 l/h Wattage Pump: 25 Watt Wattage UVC: 11 Watt Connection: 19mm, 25mm, 32mm, 40mm Cable length Pump: 10 meters Cable length UVC: 3 meters

SuperFish TopClear 18000 Kit The TopClear 18000 Kit is a complete 3-in-1 kit consisting of a pressure filter with built-in 18watt UV-C and a very economical PondECO 4900 pond pump. The top model from this series is suitable for ponds up to 18,000 litres. The new 29 Watt electronic pump is very economical in use and has a pump capacity of 5,300 liters per hour. Maximum performance with very low energy consumption! The filter is equipped with filter foam and Bio-Balls and equipped with Auto Clean Wash and Flow indicator. The filter is easy to rinse without removing the filter. You can drain the dirty water through an extra outlet by turning the knob on the pump head. The TopClear 5000 and 10000 are also available as a 3-in-1 kit with a matching Pond-Flow pump.

High capacity compact filter The Velda Clear Control 75 pressure filter is an ideal and problem-free filter system for your pond. It has several advantages over other filter systems. The capacity of the working content is greater and the biological function is very effective because the system contains an excellent medium for the growth of bacteria. The filter can withstand the high pressure that is built up when a large height has to be bridged. The Velda Clear Control 75 pressure filter is very effective, because the system is an excellent medium for the growth of bacteria due to the breakdown of floating dirt. The filter can be used well before a waterfall. Due to the materials used, the filter is well resistant to high pressure that is then built up. The filter is very easy to connect. With the installation of the Velda Clear Control pressure filter you make your pond clearer and healthier. THE 7 POSITION TAP Attention: To avoid damage to the lid, do not use the tap as a handle when moving the filter. To prevent leakage at the tap mechanism, the pump should be stopped when setting the 7-position tap. When using the tap, first press the lever down. Then it can be placed in the correct position. The following flow directions are possible with the 7-position valve (7): Position 1: filter rinse position. This position is used to flush out the dirt at the bottom of the grid. This may be necessary if coarse dirt particles have accumulated under the grid, causing the capacity to decrease (see dirt indicator). The water now flows from top to bottom, washing away the dirt. To do this, attach a hose to the waste water outlet (C). The filter materials are not rinsed clean with this. They will have to be manually rinsed. Position 2: rinse position. This position is used after the filter rinse position to flush out the dirt in the head. This may be necessary if coarse dirt particles have accumulated in the head, reducing capacity. To do this, attach a hose to the waste water outlet (C). Stand 3: medicine stand. The water does not flow through the filter materials, but directly back into the pond through the drain (B). The treated water is not filtered. However, the filter material must be rinsed after the medication period. Position 4: filtration position. The water flows through the front compartment to the bottom grid and through the filter materials to the drain (B). Position 5: block position. The filter does not let water through (always switch off the pump). This position is used when cleaning the pond pump, while the filter remains full of water. After cleaning the pump, the tap is returned to the filtration position. Position 6: idle position. This position is used to empty the pond when necessary. To do this, attach a hose to the waste water outlet (C). Position 7: winter position. In this position, the tap mechanism is relieved of pressure when the filter is out of use. This position is used for safe storage of the filter, for example in winter. Product Content Suitable for Clear Control 75 75 liter ponds up to 30,000 l

The Velda Clear Control pressure filter is very effective, because the system is an excellent medium for the growth of bacteria due to the breakdown of floating dirt. The filter can be used well before a waterfall. The Green Line pond pump has a large capacity with low energy consumption. The Clear Control 25 Set consists of: Clear Control 25 pressure filter UV-C Unit 9 Watt Green Line 5000 Filter hose All necessary filter materials and connectors

The Pressure Filters are ideal and problem-free pressure filters for the pond, also suitable for streams and waterfalls. Very easy to connect and equipped with all necessary filter materials, a UV-C Unit and hose tails. The water is cleaned in three stages: The first stage is mechanical. The visible dirt particles are removed by filter foam. The second phase is biological. The growth of micro-organisms is stimulated with the help of so-called biofilter balls. These micro-organisms remove organic components from the pond water. The third phase consists of a UV-C treatment of the water. The UV-C light kills floating algae and germs. The result is clear and healthy pond water. The pressure filters have several advantages over other systems. The capacity of the 'working content' and thus also the purifying capacity of the filter is greater than with conventional filter types. Both the mechanical and biological filtration of the water is very effective. The built-in UV-C Unit ensures that the pond not only remains crystal clear, but also healthy. Due to the materials used, the filter can withstand the high pressure that is built up when used for a waterfall. Unobtrusive, they can be buried if desired. The dirt indicator on top of the lid indicates the degree of contamination of the filter material and thus the flow capacity of the filter. The indicator will rise due to increasing pollution in the filter. The 6000 version does not have this option. The dirt backwash function on top of the lid simplifies cleaning tasks. Tip: If the UV-C Unit has been in continuous use for a pond season, the light output has decreased. It is recommended to replace the lamp every pond season for optimal results. Includes 18 watts UV-C Including hose tails, 2 x 25/32/40 mm Voltage: 220-240V AC Frequency: 50/60 Hz

The Velda Clear Control 100 pressure filter can withstand the high pressure that is built up when a large height has to be bridged and is very easy to connect. It is also very effective, because the system is an excellent medium for the growth of bacteria due to the breakdown of floating dirt. The filter can be used well before a waterfall. With the installation of the Velda Clear Control pressure filter you make your pond clearer and healthier. The multi-position valve has the following positions: Rinse mode: to rinse the filter materials under the grid; Head wash position: to wash away the dirt in the head; Emptying position: to empty the pond; Normal filter position : the water flows back into the pond through the filter materials; Medicine mode: outside the filter materials, the water runs back into the pond; Stop position: the pump can be cleaned while the water remains in the filter. Screw caps are fitted in the front compartment for the installation of 2 36 Watt UV-C Units. The UV-C Units are not supplied as standard, but are optional and can be installed at any time. Furthermore, the pressure filter is supplied complete with a cassette filled with zeolite filter material. Other filter materials are optional and can be applied according to the pond type and own discretion. Pressure filter capacity: 100 liters Maximum pond volume: 60,000 litres

With this complete filter package from Oase you are assured of a clear and healthy pond. The Oase Biopress 10000 is suitable for ponds with a maximum capacity of 10,000 litres. In the case of fish ponds, this maximum pond volume is halved. And are you the lucky owner of koi carp? Then you have to take into account a reduction to 2500 liters of pond volume. If you take this information into account, you are assured of a clear and healthy pond. You can even claim the Oasis 'Clear Water Guarantee'. Specifications Content Natural Pond: 0 - 10,000 Content Fishpond: 0 - 5,000 Content Koi pond 0 - 2.500 Max. Capacity: 3,400 l/h Wattage Pump: 70 Watt Wattage UVC: 14 Watt Connection: 19mm, 25mm, 32mm, 38mm Cable length Pump: 10 meters Cable length UVC: 3 meters

The Velda Clear Control pressure filter is an ideal and problem-free filter system for your pond. It has several advantages over other filter systems. The capacity of the working content is greater and the biological function is very effective because the system contains an excellent medium for the growth of bacteria. The filter can withstand the high pressure that is built up when a large height has to be bridged. The Velda Clear Control pressure filter is very effective, because the system is an excellent medium for the growth of bacteria due to the breakdown of floating dirt. The filter can be used well before a waterfall. Due to the materials used, the filter is well resistant to high pressure that is then built up. The filter is very easy to connect. With the installation of the Velda Clear Control pressure filter you make your pond clearer and healthier. Position 1 : filter rinse position. This position is used to remove the dirt at the bottom of the flush the grid. This may be necessary if coarse dirt particles are have accumulated in the grid, reducing capacity (see dirt indicator). The water now flows from top to bottom, making the dirt is washed away. To do this, remove the sealing cap (1). Confirm for that a hose on the waste water outlet (C). The filter materials are thus not rinsed. They will have to be manually rinsed. Position 2 : not used for ponds. Position 3 : idle position. This position is used to keep the pond in empty cases and flush out the debris in the head. Confirm for that a hose to the waste water outlet (C). Position 4 : filtration position. The water flows through the front compartment to the bottom grid and through the filter materials to the drain (B). Position 5 : block position. The filter does not allow water to pass through (always set the pump off). This position is used when cleaning the pond pump, while the filter remains full of water. After cleaning the pump, the tap back to filtration position. Stand 6 : medicine stand. The water does not flow through the filter materials, but directly back into the pond via drain (B). The treated water is not filtered. However, the filter material must be rinsed after the medication period. Position 7 : winter position. In this position, the crane mechanism is freed from pressure when the filter is out of use. This position is used when safe storing the filter, e.g. in winter.

Complete filter sets consisting of an AquaForte CBF pressure filter with UV-C, AquaForte EC pump, 10 meter pond hose and 4 hose clips.

Complete filter sets consisting of an AquaForte CBF pressure filter with UV-C, AquaForte EC pump, 10 meter pond hose and 4 hose clips.

Complete filter sets consisting of an AquaForte CBF pressure filter with UV-C, AquaForte EC pump, 10 meter pond hose and 4 hose clips.

New compact pressure filters with a unique, patented, cleaning system! 3 stage cleaning: mechanical, biological and UV. First the water is forced through the sponges (mechanical filtration) and then through the bioballs (biological filtration) in combination with an effective UVC sterilizer lamp to guarantee clear pond water. In the larger models (60&100), there is only biological filtration with filterfoam and not with bioballs. Cleaning: - lift the handle on the top of the cover; 2 -turn the lateral grip handles in the cleaning position and turn the flow selector handle; 3 - push the big handle down to squeeze and clean the internal sponges (PATENTED MECHANISM). There is no need to open the filter, you can clean it with clean and dry hands! Max. pond size is based on small fish load. For ponds with high fish load you need to reduce the max. size with 50%. It can be placed next to the pond, above the pond water level or buried into the ground according to the need of the user. Connections model 25/40: 1" male threaded incl. hosetails 25/30mm. Connections model 60/100: 2" male threaded incl. hosetails 32/38/50 mm. Max. pressure 0,4 bar. 5 metre cable. 3 year warranty, (not on UV lamp and quartz glass).

Simple pressure filters provided with backwash function for easy cleaning. For thorough cleaning the filter foam must cleaned manually. Comes with hosetails 20/25/32/40mm. Max. pond size is without koi.

De FiltoClear 13000 is een drukfilter, wat betekend dat het filter ook onder het waterniveau geplaats kan worden. Alle bedieningselementen bevinden zich in het deksel, zodat het filter zelfs in de grond kan worden ingegraven en optimaal in het vijverlandschap kan worden geïntegreerd. Het gebruiksvriendelijke trekmechanisme maakt schoonmaken gemakkelijk. U kunt de UV-C-lamp zelfs tijdens het gebruik vervangen.Geschikt voor vijvers tot: 13 m³Geschikt voor vijvers met visbestand tot: 6,5 m³Geschikt voor vijvers met koi's tot: 3,25 m³UVC vermogen: 24 wattLengte stroomkabel UVC: 3 meterAantal filtersponzen rood: 1 stukAantal filtersponzen paars: 1 stukAantal filtersponzen blauw: 1 stukTemperatuurindicatie: NeeAansluitingen ingang: 38/50 mmAansluiting ingang: 2"Aansluiting uitgang: 38/50 mmAansluiting uitgang: 2”Afmetingen: (Ø x h) 380 x 370 mmNom. spanning: 220 - 240 V / 50/60 HzNetto gewicht: 8,8 kgMaximale bedrijfsdruk: 0,2 bar

AquaKing Hose Tail PF series is suitable for PF-30 and PF-60 pressure filter models.

With the Pontec PondoPress 5000 pressure filter set you are able to keep your pond clear and healthy. This complete filter set contains a filter system, UV-C technology and a strong filter pump with a 4.5 meter long hose. The Pontec Pondopress 5000 can keep a pond without fish stock up to a maximum of 5000 liters clean. If you have a fish pond, you can keep a pond up to 2500 liters healthy and clear. Do you have a beautiful koi pond? Then you have to take into account a pond up to 1250 liters. Bio-Mechanical Pressure Filter Thanks to the strong power, the filter can even supply a higher watercourse up to 1 meter high. You can partially bury the pressure filter so that the filter is better out of sight. The pressure filter has room for several filter materials, where the filtering takes place both mechanically and biologically. First, the organic dirt particles are filtered from the water by means of foam mats. The pond water then flows past biological filter elements that use micro-organisms to convert harmful substances into less harmful substances. These less harmful substances can be absorbed by, for example, pond plants. Finally, the UV-C lamp protects the pond against floating algae and that prevents green water. Powerful filter pump With the included filter pump you can transport no less than 1500 liters of water per hour. The Pontec PondoPress 5000 pressure filter set includes a pond hose of 4.5 meters with which you can connect the pressure filter and the filter pump. With this, the pond can be freed from coarse dirt particles up to a size of 4 mm and from other turbid or suspended substances.

The Pressure Filters are ideal and problem-free pressure filters for the pond, also suitable for streams and waterfalls. Very easy to connect and equipped with all necessary filter materials, a UV-C Unit and hose tails. The water is cleaned in three stages: The first stage is mechanical. The visible dirt particles are removed by filter foam. The second phase is biological. The growth of micro-organisms is stimulated with the help of so-called biofilter balls. These micro-organisms remove organic components from the pond water. The third phase consists of a UV-C treatment of the water. The UV-C light kills floating algae and germs. The result is clear and healthy pond water. The pressure filters have several advantages over other systems. The capacity of the 'working content' and thus also the purifying capacity of the filter is greater than with conventional filter types. Both the mechanical and biological filtration of the water is very effective. The built-in UV-C Unit ensures that the pond not only remains crystal clear, but also healthy. Due to the materials used, the filter can withstand the high pressure that is built up when used for a waterfall. Unobtrusive, they can be buried if desired. The dirt backwash function on top of the lid simplifies cleaning tasks. Tip: If the UV-C Unit has been in continuous use for a pond season, the light output has decreased. It is recommended to replace the lamp every pond season for optimal results. Includes 9 watts UV-C Including hose tails, 2 x 15/20/25 mm Voltage: 220-240V AC Frequency: 50/60 Hz

The Pressure Filters are ideal and problem-free pressure filters for the pond, also suitable for streams and waterfalls. Very easy to connect and equipped with all necessary filter materials, a UV-C Unit and hose tails. The water is cleaned in three stages: The first stage is mechanical. The visible dirt particles are removed by filter foam. The second phase is biological. The growth of micro-organisms is stimulated with the help of so-called biofilter balls. These micro-organisms remove organic components from the pond water. The third phase consists of a UV-C treatment of the water. The UV-C light kills floating algae and germs. The result is clear and healthy pond water. The pressure filters have several advantages over other systems. The capacity of the 'working content' and thus also the purifying capacity of the filter is greater than with conventional filter types. Both the mechanical and biological filtration of the water is very effective. The built-in UV-C Unit ensures that the pond not only remains crystal clear, but also healthy. Due to the materials used, the filter can withstand the high pressure that is built up when used for a waterfall. Unobtrusive, they can be buried if desired. The dirt indicator on top of the lid indicates the degree of contamination of the filter material and thus the flow capacity of the filter. The indicator will rise due to increasing pollution in the filter. The 6000 version does not have this option. The dirt backwash function on top of the lid simplifies cleaning tasks. Tip: If the UV-C Unit has been in continuous use for a pond season, the light output has decreased. It is recommended to replace the lamp every pond season for optimal results. Including 24 watts UV-C Including hose tails, 2 x 25/32/40 mm Voltage: 220-240V AC Frequency: 50/60 Hz

The Velda Clear Control pressure filter is an ideal and problem-free filter system for your pond. It has several advantages over other filter systems. The capacity of the working content is greater and the biological function is very effective because the system contains an excellent medium for the growth of bacteria. The filter can withstand the high pressure that is built up when a large height has to be bridged. The Velda Clear Control pressure filter is very effective, because the system is an excellent medium for the growth of bacteria due to the breakdown of floating dirt. The filter can be used well before a waterfall. Due to the materials used, the filter is well resistant to high pressure that is then built up. The filter is very easy to connect. With the installation of the Velda Clear Control pressure filter you make your pond clearer and healthier. Position 1: filter rinse position. This position is used to remove the dirt at the bottom of the flush the grid. This may be necessary if coarse dirt particles are have accumulated in the grid, reducing capacity (see dirt indicator). The water now flows from top to bottom, making the dirt is washed away. To do this, remove the sealing cap (1). Confirm for that a hose on the waste water outlet (C). The filter materials are thus not rinsed. They will have to be manually rinsed. Position 2: not used for ponds. Position 3: idle position. This position is used to keep the pond in empty cases and flush out the debris in the head. Confirm for that a hose to the waste water outlet (C). Position 4: filtration position. The water flows through the front compartment to the bottom grid and through the filter materials to the drain (B). Position 5: block position. The filter does not allow water to pass through (always set the pump off). This position is used when cleaning the pond pump, while the filter remains full of water. After cleaning the pump, the tap back to filtration position. Stand 6: medicine stand. The water does not flow through the filter materials, but directly back into the pond via drain (B). The treated water is not filtered. However, the filter material must be rinsed after the medication period. Position 7: winter position. In this position, the crane mechanism is freed from pressure when the filter is out of use. This position is used when safe storing the filter, e.g. in winter.

Complete set, ready to use The Clear Control 50 Set is a complete filter set that can be quickly put into use. The set consists of: • Clear Control 50 pressure filter • UV-C Unit 18 Watt • Green line 8000 pond pump • Filter hose • All necessary filter materials and connectors The Velda Clear Control pressure filter is very effective, because the system is an excellent medium for the growth of bacteria due to the breakdown of floating dirt. The filter can be used well before a waterfall. The High-Stream pond pump has a large capacity with low energy consumption.

Oase FiltoClear 16000 Do you want to be assured of a pond with clear and healthy water? Then choose the Oase FiltoClear 16000. The water in this pressure filter is cleaned by means of a 24 watt UV lamp together with three filter foams. Suspended dirt particles are captured by the bacteria grown in the blue and red filter foams. This Oase FiltoClear 16000 is suitable for ponds (without fish) up to a maximum of 16000 liters.

With this complete filter package from Oase you are assured of a clear and healthy pond. The Oase Biopress 6000 is suitable for ponds with a maximum volume of 6000 litres. In the case of fish ponds, this maximum pond volume is halved. And are you the lucky owner of koi carp? Then you have to take into account a reduction to 1500 liters of pond volume. If you take this information into account, you are assured of a clear and healthy pond. You can even claim the Oasis 'Clear Water Guarantee'. Content Natural Pond: 0 - 6,000 Fish pond content: 0 - 3,000 Content Koi pond 0 - 1,500 Max. Capacity: 2,500 l/h Wattage Pump: 40 Watt Wattage UVC: 12 Watt Connection: 19mm, 25mm, 32mm, 38mm Cable length Pump: 10 meters Cable length UVC: 3 meters